Local contractor in 77642

An AC drain was clogged and in need of attention. We arrived at the customer's location in Port Arthur to clear the blockage effectively. After assessing the situation, we undertook the necessary steps to resolve the drainage issue promptly. The job was completed successfully, ensuring the system would operate smoothly moving forward.

A leaking ceiling prompted our visit to an apartment unit. We discovered that water was coming from the toilet flange and wax seal. We removed the backflush toilet, replaced the wax seal, and checked for leaks, confirming everything was secure after testing. Additionally, we noticed the pipe and flange were not positioned correctly for proper drainage, which was contributing to the issue.

A stoppage was reported in the plumbing system, requiring urgent attention. We assessed the situation and promptly addressed the issue, ensuring the functionality of the plumbing was restored. Our technician, Josh, executed the necessary repairs efficiently. The job was completed effectively, leaving the plumbing system in good working order.

A leak was detected in the pipe going to the building at the job site. We conducted an inspection and identified the source of the leak. After locating the issue, we completed the necessary repairs to ensure the plumbing system functions properly. The work was carried out efficiently and thoroughly in Port Arthur.

A new gas line was needed for the cooktop. We connected to the 1-inch meter and ran approximately 35 feet of 3/4-inch gas-tight line under the house. This required digging an access hole for installation. The line was subsequently reduced to 1/2 inch under the cabinet to ensure proper fit and functionality. The job was completed efficiently in Port Arthur.

A sewer blockage was causing water to back up into the shower, so we came out to get it taken care of. Our technician cleared the stoppage and got the line flowing properly again. Before leaving, we made sure everything was draining the way it should so the plumbing was back to normal use for the homeowner in Port Arthur.

A stoppage issue in Port Arthur had things backing up, so we came out to get it handled. After assessing the situation, our technician located the blockage and cleared the line to restore proper flow. Before wrapping up, everything was checked to make sure the system was working the way it should and back to normal use.

A malfunctioning faucet drew our attention to a service call in Port Arthur. We quickly diagnosed the issues, which included low pressure at the sink and a lack of hot water in the shower. Our technician, Daniel, efficiently resolved the problems, restoring proper water flow and temperature. The job was completed successfully, and we ensured everything was functioning as expected before closing the service.

We responded to a broken AC p-trap at a home in Port Arthur that was causing drainage issues. To reach the damaged section, we tunneled under the slab, removed the failed p-trap, and installed new piping tied directly into the AC drain line. While on-site, we also ran a cable through the remaining cast iron piping to make sure the line was clear and flowing properly. After everything was reconnected, we tested the system to confirm the condensate was draining like it should and the AC could run without further drainage problems.

A water leak at a property in Port Arthur required prompt attention. We traced the source of the leak and completed the necessary repairs to restore proper function. Josh handled the work and made sure everything was secure and holding properly before we left, giving the property peace of mind that the issue was resolved.

A water heater replacement was completed in Port Arthur due to age and declining performance. Landin removed the old unit and installed the new water heater, taking care to ensure all connections were secure and the system was set up for dependable operation. Once installed, we tested the unit to confirm it was working properly and providing reliable hot water for the homeowner.

A leak was reported by the city, indicating a potential water issue. We conducted a thorough leak search to identify the source of the problem. Upon completion, we ensured everything was functioning properly and left the site in good order. The work was successfully finished in Port Arthur.

We replaced a damaged washing machine box, carefully cutting through the drywall to make the repair. After restoring full function, we temporarily secured the wall until a permanent patch can be finished. Another quality repair done right for our local customers!

We saw cut and removed a section of concrete in the breezeway to access and repair a damaged 4-inch cleanout. This repair restored proper drainage and ensured the plumbing system was functioning correctly. After completing the work, the area was left ready for the concrete to be reinstalled.

Our team completed a project in Port Arthur where a new connection was established from the property side to the city water meter. Our team executed the work efficiently, ensuring all connections were secure, compliant, and fully functional.

We discovered a leak in the main 3/4” copper water line at a tee in the yard. To repair it, we tested the line and rerouted it through the yard and back into the water heater closet. This restored full water flow and ensured the system is operating reliably.

Brown Plumbing tunneled under the home to replace and reroute the kitchen plumbing system. Installed new hot and cold water lines with valves, rerouted and replaced the kitchen drain line, and added a new cleanout on the main sewer line. Clean, efficient work ensuring reliable water flow and proper drainage for years to come!

Brown Plumbing re-routed the AC primary drain to a new location after discovering the old line was broken under the slab. The new drain line provides proper flow and protection against future leaks—restoring efficiency and preventing water damage. Reliable, professional repair done right!